Do You Need a Grading and Erosion Control Permit for Your Colorado Springs Lot Project?
June 23, 2026
A Grading and Erosion Control (GEC) Permit is a city-issued authorization required before any clearing, grading, excavation, or filling begins on a property in Colorado Springs. The permit ensures land-disturbing activities comply with municipal stormwater regulations and protect surrounding properties and waterways. This guide covers permit definitions and triggers, the application process, required erosion control
Read
How Traffic Type Dictates Asphalt Thickness and Mix Design
April 6, 2026
Traffic type dictates asphalt thickness and mix design by determining the structural depth, binder grade, and aggregate properties a pavement needs to support its actual vehicle loads without premature failure. Every specification, from a 2-inch parking lot surface to an 8-inch industrial lane, traces back to the weight, frequency, and behavior of traffic on that
Read
Asphalt Paving Differences for Retail vs Industrial Properties
April 6, 2026
Asphalt paving for retail properties differs from industrial properties in structural design, material selection, and maintenance strategy because each property type faces distinct traffic loads, environmental exposures, and regulatory requirements. This guide covers traffic demands and load profiles, asphalt thickness and mix design, subbase and drainage engineering, striping and layout standards, maintenance scheduling, freeze-thaw performance,
Read
Why Dumpster Pads and Fire Lanes Fail Faster Than Parking Areas
April 6, 2026
Dumpster pads and fire lanes are high-stress pavement zones that deteriorate faster than standard parking areas because they endure concentrated heavy loads, chemical exposure, and extreme mechanical forces that conventional parking lot designs were never engineered to handle. We cover what makes these zones structurally different from parking lots, the specific forces that destroy them,
Read