Concrete Valley Pans and Mill and Pave at Storage Tech in Denver
- Denver, CO
- Storage building drive aisles
Asphalt Coatings Company poured new concrete valley pans down the drive aisles at Storage Tech on East 69th Avenue in Denver, then milled and repaved the asphalt around them. Our crew trenched and formed the pans on the first day and began pouring the next. Along the wooden fence at the edge of the property, a formed concrete channel went in during the same week. Nine days after the trenching, the aisles were milled, and new asphalt covered them the following day.

- Property
- Storage building drive aisles
- Services
- Concrete valley pans
- concrete channel
- mill and pave
- Location
- East 69th Avenue, Denver, CO
- Photos on file
- 83
Building the concrete valley pans
Each valley pan runs down the center of a drive aisle and went in over five steps.

Trench
The crew cut a trench through the old asphalt and stretched string lines along it to set the pan's line.

Form and base
Wood forms went in on both sides, and a skid steer dropped base material between them.

Pour
A mixer truck chuted concrete straight into the forms while the crew spread it.

Finish
Finishers worked the fresh concrete level with the tops of the forms.

Join
Steel bars left sticking out of a finished end mark where the next section of pan joins it.
A concrete channel along the fence
A formed concrete channel now runs beside the wooden fence on one edge of Storage Tech.
On the third day, a mini excavator dug a trench along the fence line. Our crew staked wood forms for both walls of the channel the next day and poured it at the end of the first week. A steel plate was later laid across the channel at one crossing point.



Milling and repaving the drive aisles
With the concrete in place, the asphalt between the new pans was milled and then repaved.

Fill the edges
During the first week, strips of new asphalt filled the gaps between the pans and the old pavement.

Mill
Nine days after the trenching, milling left a grooved surface across the drive aisles.

Tack
Tack coat went onto the milled asphalt ahead of paving.

Pave
New asphalt went down the next day and now meets the concrete pans in front of the unit doors.
Job photos
23 photos
Trenching and forming the valley pansDuring4 photos




Pouring the valley pansDuring3 photos



Finished valley pansAfter2 photos


Concrete channel along the fenceDuring6 photos






Milling the drive aislesDuring4 photos




New asphaltAfter4 photos




Where
Services used
Request a free quote for concrete valley pans or mill and pave work on drive aisles in Denver.




